Tag Archives: devx_puppex_26.04.sfs

Exton Linux, PuppEX

PuppEX (Puppy Linux) Resolute64 LXQt compatible with Ubuntu 26.04 LTS “Resolute Raccoon” :: Build 260804

Leave a comment

NEWS ABOUT PuppEX Resolute64 LXQt with the LXQt 2.3.0 Desktop Environment – Build 260804
This Puppy derivative is made by me. It is built from Ubuntu 26.04 (Resolute Raccoon) packages and packages built from woof-CE Recipes. This PuppEX Build uses kernel 7.0.11. This is possibly one of the best PuppEX versions I’ve ever made. Everything just works! I could run the system very well on all of my six different computers. Among them on a really old computer Acer Aspire 5102WLMi from 2006. Study all installed packages in this PuppEX Build.
NOTE: Ubuntu 26.04 will be supported until April, 2031. Note also that you can use the Apt command (apt update, apt upgrade, apt install MyUsefulPackage etc.) and Synaptic for installing thousands of new Ubuntu packages in PuppEX Resolute64 LXQt.

REPLACEMENT
This PuppEX Build (260804) replaces Build 2607025, which used the ROX Desktop Environment. The LXQt Desktop is more useful than ROX. I think.

INSTALL PuppEX Resolute64 LXQt to HARD DRIVE
That is best done in the same way (frugal) as regards PuppEX Noble64. Read about how to do that…
NOTE: The best way to run PuppEX (or any other Puppy Linux system) is still to run it from a USB stick and save the system changes on the stick. You will be asked about saving when you reboot or shutdown your computer. Watch this screenshot…

How to make a frugal installation – Instruction…

Definition of a “frugal install” – AI generated
A frugal installation is a way to install an operating system (common in lightweight Linux distros like Puppy Linux or MX Linux) inside a single folder on an existing partition rather than wiping or using the whole drive. Key benefits include fast performance from internal drives, easy backups, and co-existing with Windows or other systems.

IMPORTANT NOTE: The normal remasterpup2 script (which is included in all Puppy Linux versions) doesn’t work in PuppEX Resolute64 LXQt. The remasterpup2 script works very well in PuppEX Trixie64 though. It works very well in PuppEX Slack64 15.0 too.
NOTE: PuppEX Resolute64 LXQt uses the original Ubuntu 26.04 repositories. Ubuntu 26.04 LTS will be supported until April 2031…

PERFORMANCE
This PuppEX Resolute64 Build from 260804 runs very well on ALL “normal” computers. Hardware acceleration and 3D graphics work. Watch this screenshot…
Test it yourself by running the command glmark2.

DEVELOPMENT TOOLS
If you need development tools you shall download and load devx_puppex_26.04.sfs. Put devx in the folder where you have “installed” (frugal) PuppEX and then click on it to load it. Test it by running the command which make.

SCREENSHOTS
1. The LXQt DE – first screen after your first boot
2. Showing a how to configure sound
3. Running the command glmark2
4. Running YouTube
5. Running in VirtualBox

DOWNLOAD
PuppEX Resolute64 LXQt can be downloaded from Sourceforge.net – Fast, secure and free downloads from the largest Open Source applications and software directory.


md5sum for puppex-resolute64-uefi-lxqt-1650mb-260804.iso

Read about my Android-x86 Systems – 11, 10 and Pie at andex.exton.se – latest is AndEX 11 (with GAPPS)
and
about my Android 16, 15, 14, 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 5, Pi 4 and  Pi 3/2 at raspex.exton.se – latest is RaspAnd 16 (with GAPPS), RaspAnd 15 (also with GAPPS), RaspAnd 14 (also with GAPPS), 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)
Exton Linux, PuppEX

PuppEX (Puppy Linux) Resolute64 compatible with Ubuntu 26.04 LTS “Resolute Raccoon” :: Build 260725

Leave a comment

NEWS ABOUT PuppEX Resolute64 “original” with the ROX Desktop Environment – Build 260725
This Puppy derivative is made by me. It is built from Ubuntu 26.04 (Resolute Raccoon) packages and packages built from woof-CE Recipes. This PuppEX Build uses kernel 7.0.11. This is possibly one of the best PuppEX versions I’ve ever made. Everything just works! I could run the system very well on all of my six different computers. Among them on a really old computer Acer Aspire 5102WLMi from 2006. Study all installed packages in this PuppEX Build.
NOTE: Ubuntu 26.04 will be supported until April, 2031. Note also that you can use the Apt command (apt update, apt upgrade, apt install MyUsefulPackage etc.) and Synaptic for installing thousands of new Ubuntu packages in PuppEX Resolute64.

INSTALL PuppEX Resolute64 “original” to HARD DRIVE
That is best done in the same way (frugal) as regards PuppEX Noble64. Read about how to do that…
NOTE: The best way to run PuppEX (or any other Puppy Linux system) is still to run it from a USB stick and save the system changes on the stick. You will be asked about saving when you reboot or shutdown your computer. Watch this screenshot…

How to make a frugal installation – Instruction…

Definition of a “frugal install” – AI generated
A frugal installation is a way to install an operating system (common in lightweight Linux distros like Puppy Linux or MX Linux) inside a single folder on an existing partition rather than wiping or using the whole drive. Key benefits include fast performance from internal drives, easy backups, and co-existing with Windows or other systems.

IMPORTANT NOTE: The normal remasterpup2 script (which is included in all Puppy Linux versions) doesn’t work in PuppEX Resolute64. The remasterpup2 script works very well in PuppEX Trixie64 though. It works very well in PuppEX Slack64 15.0 too.
NOTE: PuppEX Resolute64 uses the original Ubuntu 26.04 repositories. Ubuntu 26.04 will be supported until April 2031…

PERFORMANCE
This PuppEX Resolute64 Build from 260725 runs very well on ALL “normal” computers. Hardware acceleration and 3D graphics work. Watch this screenshot…
Test it yourself by running the command glmark2.

DEVELOPMENT TOOLS
If you need development tools you shall download and load devx_puppex_26.04.sfs. Put devx in the folder where you have “installed” (frugal) PuppEX and then click on it to load it. Test it by running the command which make.

SCREENSHOTS
1. The ROX DE – first screen after your first boot
2. Showing a how to configure sound
3. Running the command glmark2

DOWNLOAD
This PuppEX Build has been replaced by Build 260804…

Read about my Android-x86 Systems – 11, 10 and Pie at andex.exton.se – latest is AndEX 11 (with GAPPS)
and
about my Android 16, 15, 14, 13, 12, 11, 10, Pie, Oreo, Nougat, Marshmallow and Lollipop versions for Raspberry Pi 5, Pi 4 and  Pi 3/2 at raspex.exton.se – latest is RaspAnd 16 (with GAPPS), RaspAnd 15 (also with GAPPS), RaspAnd 14 (also with GAPPS), 13 and 12 (without GAPPS), RaspAnd 11 (with GAPPS) and RaspAnd Oreo 8.1 (also with GAPPS)